Two ROJECO N30 pet nail grinder replacement heads

ROJECO Stainless Steel Grinder Head for N30 Pet Nail Clipper

£22.93
Skip to product information
Two ROJECO N30 pet nail grinder replacement heads

ROJECO Stainless Steel Grinder Head for N30 Pet Nail Clipper

£22.93

These ROJECO stainless steel grinder heads are replacements for the ROJECO N30 Pet Nail Grinder. Each head has a diamond bit surface that files nails smoothly, so when your original head wears down you can swap it instead of buying a new grinder. The pack contains two heads, so a spare is always ready.

Diamond bit grinder

The heads use an advanced diamond bit surface, which the manufacturer describes as strong and wear-resistant. Diamond grit files a nail down gradually instead of cutting it, so you can shape and smooth in small steps and avoid taking off too much at once.

ROJECO diamond bit grinder head for the N30 pet nail grinder, a strong and wear-resistant diamond-coated bit on a gold-coloured shaft

Made for the N30 brushless motor

The N30 is driven by a brushless motor with a brass shaft, which the manufacturer describes as high power, low noise and long-lasting. The grinder head sits on that shaft and turns with it, so a fresh head brings back full grinding performance without replacing the motor.

Cutaway of the ROJECO N30 brushless motor with a brass shaft driving the diamond grinder head, with a two-speed selector below

Two LED lights and two speeds

The N30 has two LED lights that light up the nail while you work, and two speed settings: low speed (7000 RPM) for small or nervous pets, and high speed (8000 RPM) for larger dogs or tougher nails. Both speeds work with these replacement heads.

ROJECO N30 series pet nail grinder with two LED lights and two speed levels, low speed 7000 RPM and high speed 8000 RPM

Key features

  • Diamond bit on stainless steel: hard-wearing, rust-resistant and built for frequent use.
  • Made for the N30: fits the ROJECO N30 Pet Nail Grinder.
  • Smooth, controlled grinding: helps you shape nails gradually and avoid over-grinding.
  • Easy to swap: no special tools needed.
  • Pack of 2: always have a spare ready.

Specifications

Fits ROJECO N30 Pet Nail Grinder
Type Replacement grinding head
Material Stainless steel with diamond bit
Works at Both N30 speeds: low 7000 RPM, high 8000 RPM
In the pack 2 x grinder heads

How to change the head

  1. Switch the grinder off.
  2. Remove the worn grinding head from the N30.
  3. Fit the new head and switch on briefly to check it is secure.
  4. Grind as normal, in short bursts, and avoid the pink area of the nail (the quick).

Good to know

Replace the head when performance drops or grinding becomes uneven, and brush nail dust off the bit after each session. These heads are made only for the ROJECO N30, so please check your grinder model before ordering. You can see the other grinders in our pet nail grinder collection.

What is in the pack

  • 2 x ROJECO stainless steel diamond bit grinder heads for the N30

Frequently asked questions

Which grinder does this head fit?

The ROJECO N30 Pet Nail Grinder only. It is not designed for other models.

How do I know when to replace the head?

When grinding feels slower or uneven, or the bit looks worn. Brushing nail dust off after each session helps it last.

Is a grinder better than clippers for nervous pets?

Many owners find a quiet grinder gentler because nails are filed gradually. Our guide to electric nail grinders versus clippers compares the two.

New to nail care? Read how to trim pet nails at home and how to clean your pet grooming tools.

You may also like