ROJECO Water Pump for Stainless Steel Cat Fountain
This ROJECO replacement water pump is made for ROJECO stainless steel cat water fountains. The manufacturer's product images name the ROJECO 3.2L stainless steel cat water fountain as the model it is designed for. If your fountain's pump has worn out or become noisy, swapping it restores steady water circulation, so there is no need to replace the whole fountain.
The pump photo below is labelled as the 3.2L stainless steel cat water fountain pump, and shows the pump with its 6ft USB power cable and four strong suction cups. The compatibility image shows the pump and its black foam ring inside the ROJECO stainless steel pet drinking fountain, below the top plate and spout.
Check your fountain model before ordering. We also list a pump for the 3.2L stainless steel fountain, and you can see all our fountains in the cat water fountain collection. If you are not sure which pump suits your fountain, contact us with a photo of the fountain and its old pump.
The pump is marked as a submersible water pump, DC 5V, 1.5W and IP68. The manufacturer lists ultra quiet running under 30dB, IP68 waterproofing and green material as the main advantages.
The pump sits in the centre of the tank, surrounded by a black foam ring, and the manufacturer describes it as easy to install and easy to line up with the water outlet.
Four suction cups on the base hold the pump strongly in place, so it stays put while the water runs.
The LED light on the pump makes it easy for pets to find the fountain to drink at night, and the manufacturer says it will not disturb sleep.
The manufacturer recommends cleaning the pump about once a week. The pump comes apart so you can reach the cover, impeller and housing.
The manufacturer's guide notes that cleaning the pump is essential to the lifespan of the fountain.
The pump page also carries the manufacturer's banner for the matching replacement filters: four black foam rings and four white filter cartridges, shown beside the 3.2L stainless steel fountain. Fresh filters help the pump work well, and you can find them on our 3.2L fountain filter and activated carbon filter pages.
| Type | Submersible water pump |
|---|---|
| Designed for | ROJECO stainless steel cat water fountains (the images name the 3.2L model) |
| Power | DC 5V, 1.5W |
| Cable | About 6ft (1.8m) USB power cable |
| Waterproof rating | IP68, fully submersible |
| Noise | Under 30dB |
| Mounting | 4 suction cups |
| Light | Blue LED |
| Cleaning | Dismantles for rinsing, clean about once a week |
| Plug | Standard EU-style plug (adapter may be needed) |
Clean the pump regularly so debris does not build up, and check the foam ring and filters when you do. Read our step-by-step guide on how to clean a pet fountain for more.
It is made for ROJECO stainless steel cat water fountains, and the manufacturer's images name the ROJECO 3.2L stainless steel cat water fountain. Check your model before ordering, or contact us with a photo.
The manufacturer recommends about once a week.
The manufacturer lists under 30dB.
Yes. It is marked IP68 and is designed to sit underwater in the tank.
It runs on DC 5V, 1.5W through a 6ft USB cable, and is supplied with a standard EU-style plug. A plug adapter may be needed in some countries.
It lights up so your pet can find the fountain at night.
The construction of the pump is very good, it disassembles for easy cleaning, and has a grid that acts as a filter for larger debris that might clog the pump. I paid R$ 4 in total with the coins, it was really worth it, better than most sources.
good product
